Online Meter Reading: Online meter reading processes are below ;
- This system requires a printer integrated handy termianal or handy terminal + printer, GPRS connection and a server.
- The staff downloads the assignment charts to their handy terminals via GPRS when they are in the field.
- Field staff starts reading the meters according to the assignment chart downloaded to their handy terminals. While reading the meters, they enter the meter number in the handy terminal. Depending on that number, the information is automatically downloaded to the handy terminal and the final consumption is entered in the handy terminal. Then the information calculated in the server realtime and the invoice is printed according to the info gathered from the server. All the subscribers are read this way.
If the GPRS connection is not available where the subscriber accommodates, then the information of the subscribers is collected on the handy terminal and as soon as the GPRS connection is established, the calculation is made right away.
- Field staff does not need to go to the head quarter to transfer the data to the handy terminal from the server or vice versa. All calculation and the transfers are made via GPRS. This saves time for both staff in the field and for the company. Also the staff in the field is monitored in real time. (The readings, the consumed amount, etc.)
-
This system consists of reading meters by handy terminals and leaving invoices to subscribers.
-
Reading meters and leaving invoices are instructed by authroized staff and collected data is transferred to the main system online.
-
Handy terminals, GSM Lines and GPRS cards are used in Online Mobile Meter Reading system.
- On Handy terminals the running software is developed by Mobit , and software is integrated with the central database system.
- Data is transferred to the central database system online by GPRS system.
All information of the subscribers (Abone no, index no, name, address of the subscriber, and the type of the subscription, value of the previous reading) is loaded to the handy terminal(CASIO IT-2000 or CASIO IT-3000) before going out to the field. When the personnel scans the barcode on the meter, he or she captures all information about the subscriber.
After the last value is entered to the system, the program calculates the amount to be paid and prints out an invoice right away. If there is any problem with the meter “meter condition code”(Meter seal is broken, cover is broken, meter out of order… )can be selected and saved to the system.
Because the invoice is printed right away, the payment process becomes very fast and short.
]]>All information is loaded to the water reading and payment program of the municipality and meter reading personnel can reach all necessary information of the subscriber during meter reading operation.
Personnel can make queries according to meter or index number. If there is any flaw with the registry information, this mistake can be corrected instantly during the process. Therefore flaws are prevented in the first step
Since the invoice is left right after the reading of the meter, the payment period is shortened compared to the old, former invoicing system.
]]>Our company which is pioneer in Turkey in Electric Meter Reading has been operating in this sector for a long time. The Casio models which have been used in TEDAŞs in Anatolia, Istanbul and metropolises are carrying improving technologies to the field.
While printing out notices and invoices for the subscribers, our meter reading project prevents possible flaws which may occur during data transmission.
With ergonomic design and large screen the products which avoid data loss, unregistered subscriber process and late payment problems also avoid large number of personnel necessary to transfer data with manual meter reading operations.
]]>This video shows you each assessment test conducted on the CASIO IT-3100 series industrial data terminal in the following order; water-splash, dustproof and finally drop test.
]]>| IT-3100 | |||
| CPU | Marvell® PXA255 Application Processor (400 MHz) | ||
| Operating System | Microsoft® Windows® CE 5.0 English Version | ||
| Memory | RAM | 128 MB | |
| F-ROM | 96 MB (User Area Appox. 30 MB) | ||
| Display | Type | 3.5-inch Advanced 2-way TFT color LCD | |
| Resolution | 240 x 320 dots | ||
| Backlight | LED (Automatic control via brightness sensor) | ||
| Indicator | 2-color LED x 2 | ||
| Printer | Printing method | Thermal line dot | |
| Paper width | 80 mm or 58 mm | ||
| Printing width | 72 mm or 48 mm | ||
| Speed | 28 lines per second (while printing Kanji characters) | ||
| Paper | Roll paper, formed paper (1P/2P), label paper | ||
| Total number of print dots | 576 (if printed on 80 mm width paper) | ||
| Character size | Free double-width characters | ||
| Font type | ANK, Symbologies (UPC-E, NW-7, Code39, Code128, OCR-B, user-defined characters x 128) | ||
| Sensor | Positioning for printing | ||
| Scanner - CMOS Imager (M55U & M56U) |
Type | 1/4-inch C-MOS Imager | |
| 1D readable symbologies | EAN, UPCA/E, Code39, NW7/Codabar, ITF, Code93, Code128, MSI/Plessy,IATA, Code11, RSS | ||
| 2D readable symbologies | Code49, PDF417, MicroPDF, Codablock, Aztec, AztecMesa, QRCode, MaxiCode, DataMatrix (ECC000/050/080/100/140/200), Composite | ||
| Image capturing | Max. 640 x 480 pixels, 2 or 256 gray scales, BMP or JPEG | ||
| Magnetic Card Reader (M54E & M55U) |
Standard | ISO Tracks 1, 2 and 3 (ISO/IEC 7811-2 2001) | |
| Input | Keyboard | Numeric (Alphabet) keys, Double zero key, CLR key, ENT key, Cursor keys, Power key, Fn key, BS key, – key, . (Decimal) key | |
| Trigger key | Right, Left sides | ||
| Touch panel | Plastic panel (resolution 240 x 320 dots) with character input pad | ||
| Interface | Bluetooth | BluetoothTM Version 1.2 compatible | |
| Infrared | IrDA 1.1 compatible Max. 4 Mbps (under CASIO original protocol) | ||
| Serial | 8 pin Serial for ActiveSync (M53E & M43E only) 14 pin Serial connector |
||
| SD slot | SD memory card (SDHC supported) | ||
| PC card slot | PC card Type I/II (3.3V/5.0V) 3.3V; Max. 500 mA, 5.0V; Max. 1,000 mA | ||
| Audio | Speaker | Monaural | |
| Power | Operation | Lithium-ion battery pack (DT-9723LI) 7.4V 2200 mAH | |
| Memory backup | Lithium battery (rechargeable) on board | ||
| Charge Time | Approx. 8 hours with DT-9723LI | ||
| Environment | Operating temperature | -4°F to 122°F ( -20°C to +50°C ) | |
| Storage temperature | -4°F to 158°F ( -20°C to +70°C ) | ||
| Operating humidity | 10% to 80%RH (no condensation) | ||
| Storage humidity | 5% to 90%RH (no condensation) | ||
| Dust/Water-Splash proof | IP54 | ||
| Drop durability | From 1.2 m in height onto concrete floor | ||
| Dimensions and weight | Dimensions | M53E : Approx. 80/108(W) x 265(D) x 28/68(H) mm M54E : Approx. 80/108(W) x 295(D) x 28/68(H) mm M55U : Approx. 80/145(W) x 295(D) x 28/70(H) mm M56U : Approx. 80/145(W) x 265(D) x 28/70(H) mm |
|
| Weight | M53E : Approx. 635g M54E : Approx. 680g M55U : Approx. 700g M56U : Approx. 655g |
||
| Application development tool | eMbedded Visual C++ 4.0 for VC++, Visual Studio 2005 |
||
| Compliance | Safety | EN60950, UL60950 | |
| EMI, EMC | EN55022/EN55024, FCC Part 15B | ||
| Bluetooth type approval | EN300328/EN301489, FCC Part 15C, RSS-210 Bluetooth logo certification |
||
|
All the features you need in one Industrial Data Terminal
|
||
 |
The IT-3100 features a built-in high speed thermal printer capable of printing up to 28 lines per second. It runs on the Microsoft® Windows®CE 5.0 operating system for easy development and integration into the enterprise. Its sturdy construction enables it to withstand a drop from a height of 1.2 meters and the IP54 level sealing allows it to be used in dusty and wet environments. With BluetoothTM and IrDA both integrated as standard, and a PC card slot for optional use of Wireless LAN and WAN cards, a wide selection of wireless communication options is possible. Models with Magnetic Card Reader and C-MOS Imager are also available. | |
| Genuine ease of use and mobility for vertical applications | ||
 |
With the high speed printer integrated as standard on all models, the Magnetic Card Reader (M54E/M55U models) and the C-MOS Imager (M55U/M56U models), it is finally possible to eliminate the need to carry separate devices such as portable printers, magnetic card readers and scanners. This not only lowers the cost of the overall solution, but also increases productivity and reliability. The IT-3100 series is ideal for issuing tickets, mobile sales, queue busting and in any situation where a receipt or label may be required. | |
| Reduced human error and improved efficiency | ||
 |
In addition to genuine ease of use and mobility, the IT-3100 series has been designed to be an all-round solution for vertical applications in all weather conditions, day or night. Meter reading, parking meter control, traffic violation control and most field service or maintenance operations will particularly benefit from the use of such a versatile device since it can significantly reduce human error and improve efficiency in these vertical applications. | |
| A wide selection of industrial standard interfaces | ||
 |
An SD memory card slot, PC card slot (TYPE I/II) and integrated BluetoothTM comes as standard. Data stored within the terminal can be backed up to an SD memory card if required. Wireless LAN communication is possible using a third-party Wireless LAN* card installed in the PC card slot. The integrated BluetoothTM module enables wireless communications with a wide range of third-party peripherals such as cellular phone and BluetoothTMAccess-Point. In addition to these industry standard interfaces, an 8-pin serial port (not available on M55U/M56U models) and 14-pin serial interface are also available for connection with external devices.
*When a Wireless LAN card is used, it is possible to use the optional terminal emulation software developed by Naurtech Corporation. |
|
| Simple paper loading mechanism and ergonomic design | ||
 |
The built-in thermal printer uses a simple one-step paper-loading method. All that is required is for a user to place a paper roll inside the paper roll holder, pull out a 2 or 3 cm length and then close the cover. This simple method saves time and ensures that the paper is always loaded correctly even when performed in the field. An elastic rubber hand strap is included with the terminal. This hand strap is secured on the back of the terminal and enables users to hold it comfortably, eliminating the need to grip too firmly. This guards against both the likelihood of users dropping the IT-3100 and excessive fatigue during prolonged use. |
|
| Sturdy construction withstands rough handling and severe environments | ||
 |
The IT-3100 has been designed and built for rugged reliability. The terminal, including the printer and paper roll holder (with the splash protector), complies with the IP54 rating (the International Standard IEC529) for dust and water-splash protection. It can withstand a drop from a height of 1.2 meters to concrete and can operate in temperatures between -20°C and +50°C (between -4°F and 122°F). The IT-3100′s rugged construction enables it to survive rough handling and give trouble free use over prolonged periods in very tough environments. | |
| Superb visibility on both screen and keyboard | ||
 |
The IT-3100 features the 2-way TFT color LCD (240 x 320 dots) screen with improved visibility during outdoor use. Unlike conventional transparent LCDs, the IT-3100′s screen uses CASIO’s proprietary optical film to effectively reflect incoming light that is normally dispersed. The screen display has vivid clarity in both indoor and outdoor environments. The IT-3100 also features a large backlit keyboard. This is automatically controlled by a brightness sensor for optimum visibility irrespective of the lighting conditions. |
|